Install and Prep Help

Our decals have an approximate lifespan of up to 5 years. The amount of exposure to sunlight can reduce this, especially in the southwestern United States. Our graphics are not to be installed wet. Surface should be clean and dry prior to application (in cases of high humidity, vehicles should be brought indoors before application if possible). Cleaning the surface with a mild diluted dish detergent or isopropyl alcohol is recommended. Surface temperatures should be a minimum of 60° and a maximum of 100° Fahrenheit. 3M recommends that after a proper installation, apply additional firm pressure to all edges. Due to these variables we cannot refund or replace graphics that have already been installed. Please consult the links below for more information.

General Procedures for Interior and Exterior Dry Application
Caring for your 3M Vehicle Graphics
Caring for your Avery Vehicle Graphics
Caring for magnetics.
2020 Sheriff Explorer installation instructions.
2021 Sheriff Durango installation instructions.
2021 Sheriff Tahoe Installation instructions.